WS Pro

Complexity transformed into Simplicity
High tensile-strength, functional design and invisible technology will work without your help!

Use:
WS Pro is a wading jacket developed especially for demanding anglers. And especially for you walking a lot - breathability is really very high. Our WS Pro is naturally 100% waterproof and saltwater resistant. Pockets that can be opened and closed with only one hand thanks to our innovative magnetic zippers - will be closed by itself as soon as You remove Your hand.
Our tough and 100% waterproof WS7 jacket is the best choice for outer layer in all kinds of weather for an active angler.

Functionalities:

• Rotatable hood with cap/shade
• Hood one hand adjustable 
• Higher collar with fleece lining
• D-ring in the back
• Two spacious front pockets at chest with YKK® AquaGuard®  zippers
• One smaller pocket on the chest pocket with YKK® AquaGuard®  zipper
• One pocket inside a pocket - perfect for a mobile phone or keys (right chest pocket)
• Hand warmer pockets with automatic magnet closure
• One spacious back pocket with magnetic closure  and drain
• One built in retractor/pin on reel 
• 2 magnet attachment 4 kg  to fit your favorite tool
• Taped seams
• Hypalon wrist closure with Velcro®
• Adjustable waist 
• Strong YKK® main zipper  – sand and salt resistable

Advantages: 

• 100% waterproof and windproof
• Highly breathable
• Taped seams 
• Salt water, sand and mud resistant pockets
• Highly durable
• More spacious in the shoulder area as well as the lower arm part 
• Oeko-Tex certified  fittings
• Designed in Denmark
• Produced in EU

Can be used as:
Outerwear/wading jacket

We care for you and nature:
Thanks to the strong design and fabrics this jacket will outlive most other jackets of the same type. Durability makes the most sense when it comes to limiting climate impact. Fittings are eco-tex certified.
WS Pro has an ultra low carbon footprint, as it is “all european”

Introduction:
Even though we have made fishing jackets for more than 25 years we still pursue perfection. We first and foremost search for improvements in our current models. On this journey, we dig deeper into the complexity of being simple. We transform complexity into Simplicity. WS Pro must submit to your needs immediately, without you reading a manual first.

You put it on and use it. With WS Pro it is our goal to create the world’s best fishing jacket.

When we promise something like “the world’s best fishing jacket”, it is inherently an interpretation. For us, it first and foremost requires that there is room for improvement in the current model(s) that can be corrected.

On this “journey” we dig deeper into the complexity of being simple. 

Complexity transformed into ease of use. Simplicity not for simplicity’s sake - but simplicity with a deep respect for the user - You.

Everything we’ve learned since the first edition of this jacket back in 2009 has been refined and brought together in WS Pro.

Our jacket has undergone intensive tests. We have taken all the valuable historical data gathered in this version.

WS Pro is so complex that we can only produce it in highly technical-advanced and high quality sew factories. Our jacket is produced in a Swedish owned factory and all materials/fittings are supplied by European partners. For example:

• High tensile fabric – produced in  Sweden
• Special designed tape – produced in Belgien
• Pockets with automatic magnet closure – produced in France

WS Pro is designed in Denmark and produced in the EU.

We guarantee you unrivaled quality, and you can be absolutely sure that every single jacket has gone through an intensive quality test before it leaves the factory.

With WS Pro we have done our best to produce the world’s best and most durable fishing jacket. We have also narrowed down the supplier network to the EU, which considerably lowers the CO2 footprint.

Pockets:

WS Pro has 7 pockets:

1. Two spacious front pockets at chest with YKK® AquaGuard®  zippers
2. One smaller pocket on the chest pocket with YKK® AquaGuard®  zipper
3. One pocket inside a pocket - perfect for a mobile phone or keys (right chest pocket)
4. Two hand warmer pockets with magnet closure
5. One spacious back pocket with magnetic closure  and drain

1. Two spacious front pockets at the chest with YKK® AquaGuard®  zippers. These pockets expand after content - it means it is flat when empty , but are popping out when You have something in the pockets. There is  one built in retractor/pin on reel in the left pocket. Large chest pockets fitted with YKK® AquaGuard®. These chest pockets can expand if needed. Inside the chest pocket is a Built-in retractor.
2. One smaller pocket on the left chest pocket with YKK® AquaGuard®  zipper. This pocket is perfect for example for snoods.
3. A little pocket inside the right chest pocket. We call it “a waterproof pocket in a waterproof pocket”. This design is the closest we can come to achieve a 100% waterproof pocket. you can use this pocket for your car keys or other.
4. On each side of the jacket are hand warmer pockets with an innovative  magnetic closure - they close themselves, when you remove Your hands.
5. Back pocket with easy access and innovative magnetic closure, which closes by itself after use. This pocket is very spacious and fills the whole length in the back.

Pockets are waterproof against rain, snow and wave splashes. But If pockets become submerged in water, water will come in. 
The same will happen if pockets are not completely zipped, water will eventually penetrate. No pockets are completely waterproof because of condensation, which is unavoidable.  

We recommend placing your mobile phone and other electronic devices in a special waterproof bag designed for this purpose.

Mounting of net and tools:
You will find many different options to mount Your tools. For example 4 kg magnets placed in front, which can hold your favorite tools.  Integrated elastic cords and hidden magnets keep tools close to the jacket during  fishing.
You can move magnets from one place to another after your needs, so that your tools are easy to reach.
There is a pin-on-reel for tool mounting In the left chest pocket .

Placed high on the back of the jacket you can find a D-ring for hanging on a net or other items.

Fit:
Rotatable hood with shade that follows your head movements. The hood and collar are separated, providing greater comfort when the cap is  used.

• 3-way adjustable:
• Inner Hood
• Visibility / angle
• Shade

Shoulder section and sleeve designed to provide great freedom of movement when spin or fly fishing. The adjustable waist and hem also ensures optimal comfort regardless of fishing situation.

Fabric:
Unlike the vast majority of our competitors, our fabric is made in Scandinavia.

It is a 3 layer waterproof, breathable and durable “sandwich construction” consisting of a durable liner, a breathable membrane and a face of a super high tensile Polyamide. All welded together.

Try WS Pro if you want to try the latest technology and have an attitude towards local production.